Factory-direct from Guangzhou Wholesale price from 1 pc · lower at 3, 5 and 10 pcs 3% off orders from $1,000, up to 5% Ships in 3–6 business days

Silver $45.15/oz Gold $3,731.97/oz Nov 19, 19:37 GMT+8

View cart

Clasps and earring backs

Earring back types: push backs, screw backs, lever backs and more

Short answer

The main types of earring closures are butterfly push backs, silicone backs, locking push backs, screw backs, flat backs, lever backs, hinged huggie closures, latch backs and French hooks. Screw and locking backs are the most secure; butterfly backs are the easiest to use. Match the back to the earring's weight and to its post.

Reviewed by the 925hi QC team 4 min read

On this page 4 sections
  1. Types of earring backs for studs, by post
  2. Flat back earring backs
  3. Which earring back to choose for resale
  4. Pair or piece? Read the unit before you compare prices
Back How it closes Security Best for
Butterfly push back (friction) Two curled metal wings grip a smooth post Medium; loosens as the wings spread Light studs
Silicone or rubber back Friction on the post Low to medium Light studs; a spare for metal backs
Locking push back A spring catch grips a grooved post; squeeze to release High Moissanite and other valuable studs
Screw back The back threads onto a threaded post Highest Valuable studs, children's earrings
Flat back (labret) A flat disc fixed to the post; the front pushes or screws in High Cartilage piercings, sleeping in
Lever back A hinged lever closes against the hook High Drops and dangles
Hinged huggie (click top) A hinged bar clicks into the hoop High Huggies and small hoops
Latch back A wire hooks into a catch behind the hoop Medium to high Larger hoops
French hook (fish hook) An open hook through the ear, often with a stopper Low without a stopper Light drops
Threader A fine chain pulled through the piercing Low Light, fashion pieces

Types of earring backs for studs, by post

Most stud posts are 20 gauge, about 0.8 mm thick; 18 gauge (about 1.0 mm) is used for heavier studs. A back made for one gauge grips the other badly, so keep spare backs of the same gauge.

Post Backs that fit Backs that do not
Smooth post Butterfly, silicone Screw back
Grooved (notched) post Butterfly, silicone, locking push back Screw back
Threaded post Screw back of the same thread Locking backs; butterflies wear the thread
Flat back post Its own front, threadless or threaded to match Butterfly, silicone and screw backs

Threads differ between makers, so screw backs are only interchangeable within one supplier's line.

Flat back earring backs

A flat back earring turns the usual stud around: the flat disc is the back, fixed to the post, and the decorative front fits into the post from the front. Nothing pokes out behind the ear, so flat backs suit helix, tragus and conch piercings and sleeping in.

Type How the front attaches Notes
Threadless (push pin) A pin on the front is bent slightly and pushed into the post; tension holds it Fronts change quickly; more bend gives a tighter hold
Internally threaded The front screws into a thread inside the post Very secure; fronts fit only the same thread
Externally threaded The thread is on the outside of the post Older body-jewelry style; the thread can scrape a piercing

Flat back posts are usually 16 gauge (about 1.2 mm) or 18 gauge (1.0 mm), thicker than a 20 gauge stud post, and 6 to 10 mm long. Sterling silver flat backs are for healed piercings; fresh piercings need implant-grade starter jewelry. When you buy flat backs wholesale, check the gauge, the post length and whether the front is threadless or threaded, and put all three in your listing: customers match them to the post they already wear.

Which earring back to choose for resale

  • Valuable studs, such as moissanite, sell better with locking or screw backs, because customers worry about losing them.
  • Huggies and small hoops use hinged closures, which need no separate back.
  • Drop earrings that pull the lobe forward wear better on lever backs than on open hooks.
  • Customers lose backs: spare backs at the register are an easy add-on sale.

Pair or piece? Read the unit before you compare prices

Studs, hoops and huggies are usually sold by the pair; single earrings, cartilage studs and mixed sets are often sold by the piece. A price of $4.00 per piece is $8.00 a pair. Compare suppliers per pair, and check the unit on each product page before you add a style.

Where the product page lists a closure, that is the back it ships with; for any other style, ask sales before you order. Stud sizes in mm and hoop diameters are in stud and hoop earring sizes. Shop wholesale sterling silver earrings and wholesale moissanite jewelry.

Questions buyers ask

Which earring back is most secure?

Screw backs and locking push backs are the most secure, then lever backs and hinged huggie closures. Butterfly push backs are the easiest to use but loosen with wear.

How do I know which back an earring has?

Where the product page lists a closure, that is the back it ships with; for any other style, ask sales before you order.

Do screw backs fit any earring post?

No. A screw back only fits a threaded post with the same thread, and threads differ between makers. Push backs fit smooth or grooved posts of the same gauge.

What are flat back earrings?

Flat back earrings are studs whose back is a flat disc fixed to the post; the decorative front pushes or screws in from the front. Nothing pokes out behind the ear, so they suit cartilage piercings and sleeping in.

Posts are usually 16 or 18 gauge and 6 to 10 mm long, threadless or internally threaded. Sterling silver flat backs are for healed piercings. Types and fit: flat back types and posts.

More answers in the wholesale FAQ.